Joined in 2023 
82 
63 About this deal
Most of us will have some Silverline tools in our garage or shed. They are good value and useful for jobs which you don’t do often or won’t need anything too sophisticated, such as chisels and hammers. The TB01 follows the same pattern and is excellent value; in fact it is the cheapest workbench we could find. While the Silverline is fine for lighter tasks such as painting and cleaning, it did feel a little wobbly when loaded with our heavy wheel. We’d certainly be nervous about approaching the claimed 100kg maximum load capacity. There are some downsides though. The half-hour it takes to assemble the bench might be forgotten after a while but is certainly an irritation at the time. But the weedy 100kg capacity means you’ll be a little limited as to what the Minotaur can be used for, and it feels a little wobblier when faced with a heavy wheel or other weighty component. The “step” is useful for steadying the bench while sawing and can be used to work on taller parts, such as the top of a body panel. The downside is that folding and unfolding the Clarke is a time-consuming business, with legs to be deployed and knobs to be tightened. But it is reasonably compact when folded.
Keter Folding Work Bench | Toolstation Keter Folding Work Bench | Toolstation
The downside is a relatively low 100kg capacity and the half hour you need to invest on assembly. If your garage space is at a premium you might also need to consider storage, because the Minotaur is an awkward shape once folded. The stated maximum weight capacity is 100kg, but it felt wobbly even when we loaded it with a wheel and tyre. It’s best left for lighter duty jobs such as painting, where the price means you won’t be so worried about messing it up like you might a more expensive workbench. Clarke CFWB1 Clarke’s bench has some useful features, including a choice of two working heights for the work surface and a substantial 150kg load capacity, which is enough for an entire engine or gearbox from a smaller car. The plywood worktop is fixed in a horizontal position, though.The really remarkable feature of the Workmate is the maximum load capacity – a whopping 250kg. That’s enough to hold a Rover V8 engine. We didn’t test it to that extreme, but it certainly felt perfectly secure with our heavy wheel and differential. Mac Allister Folding Workbench 850MM – Recommended Hi, as per the title, does anyone know if the MacAllister folding work bench sold by Screwfix is the same as the Keter Folding Work Bench sold elsewhere?
Mac Allister Folding Workbench, (H)755mm | Tradepoint
It feels solid and stable too, and has a decent 150kg load capacity, which should be enough for a small engine. The downside to this is a comparatively heavy 11.7kg overall weight.That saving is almost enough to buy the third-placed Minotaur. It’s flawed in many ways, but we loved the ability to tilt the jaws to work on awkward items. We couldn’t find a workbench any cheaper than the TB01, so as you might expect, it’s free of frills and requires about 30 minutes of assembly time. Yet once built, the Silverline does most jobs reasonably well, with horizontal-only clamping planks. These are less versatile, but the uncomplicated mechanism means it folds up smaller than the Minotaur for storage and weighs just 4.5kg, too. If space is at a premium you’ll need to think about storage too, as the Minotaur’s switchable clamping jaws mean it is an awkward and lumpy shape once folded. Draper Fold Down Workbench 800mm We reviewed six of the best-selling workbenches to see which stood out for the motoring DIYer. We tested how well they gripped a radiator hose while being cut, held a wheel while it was being wire brushed, and provided a platform to hold a differential. Hagerty International Limited are authorised and regulated by the Financial Conduct Authority (FCA Firm Reference Number 441417).
mac allister folding table vs keter folding table | Talk mac allister folding table vs keter folding table | Talk
Folding workbenches provide a safe platform to put parts on and clamp tight while you work on them. Once you’re finished, the benches neatly fold away to maximise garage space. We put six designs to the test to see if the original Workmate has a vice-like grip on the Best Buy title, or a rival can set a new benchmark in our workshop How we tested them The two bench boards are fixed horizontally, but the clamping edges are shaped to grip smaller items such as pipes or fastenings. The work boards themselves are larger too, with handy measurements for length and angles which could make fabricating parts easier. Once you’ve finished working, the Draper collapses easily and folds almost flat to make storage easier.
Mac Allister seem to have reinvented the wheel with this workbench. Unlike the others in the test, it doesn’t follow the ‘replica Workmate’ formula, instead using a mainly plastic construction and a clever folding mechanism. To save costs it comes as a big bag of bits, so you’ll need to do about 40 minutes of assembly yourself, but once built you are left with a pretty basic – and small – bench. But it is uncomplicated, easy to use and folds up to a smaller size for storage. The 4.5kg weight means it’s not too much effort to lift off a hook on a garage wall either – that’s less than half the weight of most other benches here. It folds up into a compact and almost flat shape, making it practical to hang on a wall. When unfolded, the hinged legs allow for two working heights, meaning you can work on taller items without having to stand on your tip toes. There’s also a step, which can also be used to steady the bench while sawing or wrestling with a rusty bolt. Every car enthusiast dreams of having a pristine workshop, filled with equipment and with a spacious workbench for tinkering with broken bits of their car or motorcycle. If money was no object, we’d choose the innovative Mac Allister Folding Workbench. It is easy to use, and the size of the surfaces makes it much more useful for most automotive tasks. It also folds down neatly for storage.
Mac Allister Parts | Partmaster Mac Allister Parts | Partmaster
Some classic Morris owners might buy this good-value workbench just for the name, but it has another useful feature. In addition to the conventional clamping action of the two plank-like work surfaces, they can also be individually tilted to 45 or 90 degrees. This makes it far easier to hold awkwardly shaped or large components. I have two of the Keter, a McAllister and a Forge Steel - The McAllister and Forge steel are own brands (Screwfix, B&Q) but basically badged items. I've not noticed any difference between them. They were bought at different times - normally when on offer somewhere. At first glance the Clarke bench looks similar to our winning Workmate, with legs that can be deployed or folded to give two possible working heights. It also has a step so you can put a foot on it comfortably to steady the bench while using a saw, or can reach high up if working on a tall parts such as a bumper. These are almost universally known by the name of the original – the Workmate – which was invented in the 1960s by a Ford and Lotus engineer. Whoever makes them now, they allow you to safely clamp parts to cut, paint, clean or disassemble in comfort and safety. On the face of it there seems to be little reason why the Draper is worth twice the price of a bench like the Silverline. It has no special features such as dual heights or tilting work surfaces and looks pretty basic. But as reflected in its name, the Draper’s main selling point is its 800mm width.The clamps are low quality, interchangeable and the bench sizes seem the same but I've never actually measured them. They're versatile and okay for what they do but I wouldn't recommend them as your sole woodworking bench - too low for all day use and not rigid enough for hand planing. Mine have had a hard life and they still function although one of them has sagged a little in the middle so that it's no longer flat. They're heavier that they look but very easy to carry and store/transport and for that reason they have made my B&D Workmates redundant. They take literally seconds to erect or collapse - much faster than anything else I've ever used. Who knows ... there are a couple of dimensional differences although both look identical. The difference in capacity is massive - if they were closer, then it may be a reasonable assumption that they could be, but to me, from what is online, they may be different build specs.
Great Deal 
New Comment